HDPE Butt Fusion Welding Machine

We provide a wide range of Butt Welding Machines In different Configurations. They follow as –

•  L560 D for butt fusion welding of tubes with an external diameter of 315-560 mm at common pressure classes.
•  L-355 A for Butt fusion welding of pipe size 160-355mm at standard pressure class.
•  L-250 C for Butt fusion welding of pipe size 110-250mm having standard pressure class.
•  L-200 E for Butt fusion welding of pipe size 63-200mm at all standard pressure classes.

The applications are primarily in the plastic pipeline industry. Other than that, they can also be used in the chemical and construction industries.

BUTTWELD L 355 A Plastic Pipe Welding Machine For Butt fusion welding of Polyethelene & Polypropelene pipes and fittings 0 200-355 mm all standar pressure stages

Trimmer:

• High-torque electric drive. 750 watt optimised cuting speed.
• Compact enclosed aluminum trimmer housing with locking mechanism.
• Firm mounting for the trimmer discs absorbs trimming pressure ensuring parallel pipe ends, external chip discharge.
• Butt fusion pipe welding machine for use in trenches on site and in the workshop Ideal for laying gas pipelines water supply pipe line and any kind of work for HDPE PP and PB pipes.

Heating Plate:

• High-quality non-stick long life PTFE coating.
• Electronically regulated Temperature adjustment Controller.
• Electronic temperature regulation va external control bax with control lamp Control lamp for heating intervals, overheat protection tempe rapture regulation to prevent unintentional reseting plug sockets for hydraulic unit and trimmer.

Adaptor Clamping Inserts:

• Wide aluminum inserts for pipe-to pipe joints.

Hydraulic Unit:

• Stable pressure level maintained, even when the hydraulic pump is switched off.
• Compact, dirt-proof 750 W electro-hydraulic unit Easy to read fine scale pressure gauge with vibration free needle (0-100 bar)

Basic Unit:

• Hydraulic system with hardened guide rails.
• Rigid construction guarantees accurate parallel pipe ends.
• Dual, twin pipe clamps for a secure gnp and easy axialradia alignment of pipes, paralel hydraulic cylinders.
• The 3 rd. basic clamp may be relocated and fixed again for welding fittings without resetting or a loss of stability.

High performance plastic pipe welding machine 200-355 mm 0, supplied complete as follows:

Basic und with 4 man clamp sets (315 mm 8), tubular steel skid frame, hydraulic unit and 2 high pressure hoses (4 m. with Quick action couplings) two complete sets of adaptor clamping inserts for 200-355 (pipe-to-pipe and pipe-to-fitting electric trimming unit, neating plate with coded plug, carrying frame for the trimmer and heating plate. fitting tools and transport case.

For Butt fusion welding of Polyethelene & Polypropelene pipes and fittings all standar pressure stages

Trimmer:

• High-torque electric drive. 1100 watt optimised cutting speed.
• Compact enclosed aluminum trimmer housing with locking mechanism.
• Easily removable and firm mounting for the trimmer discs absorbs trimming pressure ansuring parallel pipe ends external chip discharge.
• Butt fusion pipe welding machine for use in trenches, on site and in the workshop. Ideal for laying gas pipelines, water supply pipe line and any kind of work for HDPE, PP and PB pipes.

Heating Plate:

• High-quality non-stick long life PTFE coating.
• Electronically regulated, Temperature adjustment and monitoring in compliance 6400 watt.
• Electronic temperature regulation via external control box with control lamp, Control lamp for heating intervals, overheat protection, temperature regulation to prevent unintentional reseting, plug sockets for hydraulic unit and trimmer.

Adaptor Clamping Inserts:

• Wide aluminum inserts for pipe-to pipe joints.

Hydraulic Unit:

• Stable pressure level maintained with accumulator even when the hydraulic pump is switched off.
• Compact, dirt-proof 750 W electro-hydraulic unit Easy to read fine scale pressure gauge with vibration free needle (0-100 bar)

Basic Unit:

• Hydraulic system with hardened guide rails.
• Regid construction guarantees accurate parallel pipe ends.
• Dual, twin pipe clamps for a secure grip and easy axial/radial alignment of pipes, parallel hydraulic cylinders.
• The 3rd basic clamp may be relocated and fixed again for welding fittings without resetting or a loss of stability.

High performance plastic pipe welding machine 250-500 mm Ø, supplied complete as follows:

Basic unit with 4 main clamp sets (500 mm Ø), rectangular steel frame, hydraulic unit and 2 high pressure hoses (4 m, with quick action couplings), two complete sets of adaptor clamping inserts for 250-450 Ø (pipe-to-pipe and pipe-to-fitting), electric trimming unit, heating plate with coded plug, carrying frame for the trimmer and heating plate, fitting tools and transport case. Transport Trolly can be supplied as on demand.