- B/42, Maruti Industrial Estate, GIDC Vatava, Phase-I Ahmedabad, Gujarat
- +91 9427617094Toll Free
- Mon - Sat 9.00 - 7.00Sunday CLOSED
PE Pipe Welding Machine
PE Pipe Welding Machine - A Highly Efficient Machine
The PE Pipe Welding Machine for Polyethylene ( PE ) Pipe and its fittings are offered in different models, each with specific applications and benefits. The selection process must be considered and used as per the project’s (pipeline) size and the pipe fittings. In the polyethylene welding industry, the polyethylene welding machine is the most widely used equipment. In addition, this equipment is manufactured and supplied in four different models, ranging from 63 to 560 mm in diameter and competent for welding up to a pressure of 100 bar.
The polyethylene welding machine manufactured by LEO ENGINEERS is custom-built to do work on a variety of various projects and applications. We are the leading PE Pipe Welding Machine Manufacturers as we manufacture high-grade PE welding machines to suit the demands of our clients. Further, our welding machines withstand extreme situations and offer longevity.
PE Pipe Welding Machine Product Gallery
PE Pipe Welding Machine - The Process Of Transformation!
When the PE gets subjected to heat, its molecular structure gets transformed as it changes its state to the amorphous (shapeless) one, resulting in the tube’s flexibility. It is because the weld site and molecular structure of polyethylene shift from amorphous to crystallised after boiling and chilling to match the joints of the PE pipe.
However, there is a multitude of techniques for PE pipes, and we at LEO ENGINEERS take full consideration of them. We have been in the business of welding machines since 1996 and therefore understand every market trend and requirements easily. Over the years, we strived to work for our clients, and today we have a huge customer base. Because of such an approach, we became the top PE Pipe Welding Machine Suppliers In India.
PE Pipe Welding Machine Specification
- Tap water
- Wastewater
- Cable protection
- Gas etc.
- 220-degree Celcius is the fixed welding temperature.
- The pipe must get changed over time in small intervals
- The welding pressure should not be much. It must be as short as possible.
BUTTWELD L 355 A Plastic Pipe Welding Machine For Butt fusion welding of Polyethelene & Polypropelene pipes and fittings 0 200-355 mm all standar pressure stages
Trimmer:
- High-torque electric drive. 750 watt optimised cuting speed.
- Compact enclosed aluminum trimmer housing with locking mechanism.
- Firm mounting for the trimmer discs absorbs trimming pressure ensuring parallel pipe ends, external chip discharge.
- Butt fusion pipe welding machine for use in trenches on site and in the workshop Ideal for laying gas pipelines water supply pipe line and any kind of work for HDPE PP and PB pipes.
Heating Plate:
- High-quality non-stick long life PTFE coating.
- Electronically regulated Temperature adjustment Controller.
- Electronic temperature regulation va external control bax with control lamp Control lamp for heating intervals, overheat protection tempe rapture regulation to prevent unintentional reseting plug sockets for hydraulic unit and trimmer.
Adaptor Clamping Inserts:
- Wide aluminum inserts for pipe-to pipe joints.
Hydraulic Unit:
- Stable pressure level maintained, even when the hydraulic pump is switched off.
- Compact, dirt-proof 750 W electro-hydraulic unit Easy to read fine scale pressure gauge with vibration free needle (0-100 bar)
Basic Unit:
- Hydraulic system with hardened guide rails.
- Rigid construction guarantees accurate parallel pipe ends.
- Dual, twin pipe clamps for a secure gnp and easy axialradia alignment of pipes, paralel hydraulic cylinders.
- The 3 rd. basic clamp may be relocated and fixed again for welding fittings without resetting or a loss of stability.
High performance plastic pipe welding machine 200-355 mm 0, supplied complete as follows:
Basic und with 4 man clamp sets (315 mm 8), tubular steel skid frame, hydraulic unit and 2 high pressure hoses (4 m. with Quick action couplings) two complete sets of adaptor clamping inserts for 200-355 (pipe-to-pipe and pipe-to-fitting electric trimming unit, neating plate with coded plug, carrying frame for the trimmer and heating plate. fitting tools and transport case.
| Description | Capacity | Weight Kg | 230 V 50 Hz |
| Buttweld L 355 A complete | 200, 225, 250, 280,315, 355 | 325.0 | – |
| Buttweld L 355 A Basic unit without adaptor clamping inserts | 355 | 257.0 | – |
For Butt fusion welding of Polyethelene & Polypropelene pipes and fittings all standar pressure stages
Trimmer:
- High-torque electric drive. 1100 watt optimised cutting speed.
- Compact enclosed aluminum trimmer housing with locking mechanism.
- Easily removable and firm mounting for the trimmer discs absorbs trimming pressure ansuring parallel pipe ends external chip discharge.
- Butt fusion pipe welding machine for use in trenches, on site and in the workshop. Ideal for laying gas pipelines, water supply pipe line and any kind of work for HDPE, PP and PB pipes.
Heating Plate:
- High-quality non-stick long life PTFE coating.
- Electronically regulated, Temperature adjustment and monitoring in compliance 6400 watt.
- Electronic temperature regulation via external control box with control lamp, Control lamp for heating intervals, overheat protection, temperature regulation to prevent unintentional reseting, plug sockets for hydraulic unit and trimmer.
Adaptor Clamping Inserts:
- Wide aluminum inserts for pipe-to pipe joints.
Hydraulic Unit:
- Stable pressure level maintained with accumulator even when the hydraulic pump is switched off.
- Compact, dirt-proof 750 W electro-hydraulic unit Easy to read fine scale pressure gauge with vibration free needle (0-100 bar)
Basic Unit:
- Hydraulic system with hardened guide rails.
- Regid construction guarantees accurate parallel pipe ends.
- Dual, twin pipe clamps for a secure grip and easy axial/radial alignment of pipes, parallel hydraulic cylinders.
- The 3rd basic clamp may be relocated and fixed again for welding fittings without resetting or a loss of stability.
High performance plastic pipe welding machine 250-500 mm Ø, supplied complete as follows:
Basic unit with 4 main clamp sets (500 mm Ø), rectangular steel frame, hydraulic unit and 2 high pressure hoses (4 m, with quick action couplings), two complete sets of adaptor clamping inserts for 250-450 Ø (pipe-to-pipe and pipe-to-fitting), electric trimming unit, heating plate with coded plug, carrying frame for the trimmer and heating plate, fitting tools and transport case. Transport Trolly can be supplied as on demand.
| Description | Capacity | Weight Kg | 230 V 50 Hz |
| Buttweld L 500 B complete | 250, 280,315, 355,400,450,500 | 637.00 | – |
| Buttweld L 500 B Basic unit without adaptor clamping inserts | 500 | 480.00 | – |